FROG TKL Build Guide

- Frog TKL Build Guide (Video) by DBOKEY

- Easy way to assemble plates for Frog TKL

 

Step 1. Parts

Check your Parts for Build

- Housing
- Screws
- PCB
- Plate
- Tadpoles
- Feet

Required parts to Build the keyboard

- Switches
- Stabilizers
- Lubricant (Optional)
- Hex Driver (H2.0)

 

Step 2. QC

- QCing the board and parts

- Check the PCB (use Tweezers, VIA Key tester)

 - How to check PCB using VIA

 

Step 3. Open the Case

- Unscrewed on the bottoms using H2.0 Hex driver

 

Step 4. PCB and Plate

- Put the Stabs and Switches on the PCB and Plate

 

Step 5. Install the Tadpole

 

- Put the Tadpoles in the hole of Plate
-The direction of insertion is the opposite of the switches

 

Step 6. Put the Plate and PCB on the Bottom

- Put the Plate and PCB on the Bottom case first

 

Step 7. Top and Bottom Assemble

- Gently place top on bottom

- Tighten the Screws and Insert feet on the bottom

- Done