Venom HE TKL PCB & Plates

Venom HE H87 F12 PCB
Type : Hall effect
Material : FR4
Thickness : 1.6mm

F1-8X HE Aluminium Plates
Material : Aluminium
Thickness : 1.5mm
Layout : F12 TKL

F2-84 HE Aluminium Plates
Material : Aluminium
Thickness : 1.5mm
Layout : F12 TKL
include : JST 150mm Cable

Frog TKL HE F12 Aluminium Plates
Material : Aluminium
Thickness : 1.5mm
Layout : F12 TKL
*Caution: Not compatible with F13 WKL 

Glare TKL HE Aluminium Plates
Material : Aluminium
Thickness : 1.5mm
Layout : F12 TKL
include : JST 150mm Cable

Tiger 80 Lite HE Aluminium Plates
Material : Aluminium
Thickness : 1.5mm
Layout : F13 TKL
Include : JST 150mm Cable

Venom HE Foam Set
F12 Plate foam (3.5mm)
EPT Case Foam (3.0mm)
IXPE Switch Film (0.5mm)

To change key settings, refer to this page:
Key Setting

Compatible Switches
GEON Raw HE Switch
GEON Raptor HE Gaming Switch

Keep in mind
PCB does not include a JST cable and screws.
Plates include screws compatible with Venom PCBs.
O-rings must be used on F1-8X / F2-84 Keyboard kits.
Tadpoles must be used on Frog TKL F12 Keyboard kits.

All products are made in the size of Hiney H87c/H87nu, which is the standard in the custom keyboard sector.
Before you start assembling the PCB, please carry out a PCB test and check if all keys function. 
Before assembling the screws, remove the yellow tape on the stand-offs of PCBs.
Whether or not to use foam sets is optional. 
Cut the space bar area of the foam set to fit your keyboard layout.
To assemble the PCB and the plate, you must use all 14 screws. 
After removing the C-type port once, you cannot put it on again.
Remove the daughter board installed above the arrow keys before usage, since electricity may go through.
Daughter board and C-type ports are made of FR-4, which means you must use a nipper. If you use tools made for other uses such as scissors, the product may be damaged. 

These PCBs, such as photos, are not eligible for exchange or refund.

The stabilizer mounts normally.